Shop
UV LED Hand Lamp
UV LED Light - Model ZUV-6
ZUV-6 Hand Held Lamp is designed to be 100% free from UV-B and the LED’s emit almost no visible light.It is complaint with ASTM UV-A intensity and wave length specifications for LPT & MPT. Is built with mechanical cooling design, ZUV-6 is approved to be dust and water resistant. This hand held lamp can be used for inspection any part or intricate surfaces of parts. This lamps gives a maximum intensity of 6000Microwatts/Sqcm IT is widely used in NDT inspection booths, fluorescent penetrant and magnetic particle inspection, screening of fluorescent particles, wash station & inspection and so on.
Download Brochure
V3 Phase-Series
VM-Series
VP-Series
Portable MPI Power Source Range from 1500Amps to 3,000Amps
- Mobile Power Source of maximum current output AC/HWDC (Maximum output to be measured with (Standard Mag Cables 120Sqmm X 5Mtrs X 2 Nos with Prods)
- Line Input 415 Volts, 50Hz, 3Phase.
- Thyristorised, infinitely variable current control.
- ‘F’ class insulation.
- Digital Ammeter for current indication.
- Provision for Quick Changing over of Cables from AC to DC.
- Safety Interlocking limit switch for AC/DC.
Waste water
For Further Informations on Technical & Commercial Details, Kindly send the enquiry with components drawing & dimensions with technical specifications as per your requirement to [email protected] / [email protected]
ZC-230 Series
Standard MPI Bench Equipment
The Magnetic Particle Inspection Equipment ZC 230 is designed and manufactured to deliver 2500 Amps AC / 3000 Amps FWDC. The 1phase FWDC is extremely useful to detect Near surface discontinuities whereas the AC is used to detect Surface discontinuities. Independently controlled contact and coil circuits determines superior indication visibility.
ZC-9
AC Electromagnetic Yoke
AC electromagnetic yoke, ergonomically designed to improve productivity and reduce operator arm and wrist fatigue. The yoke generates a strong AC magnetic field for the detection of surface indications during magnetic particle testing. Lightweight with an ergonomic grip and trigger, the ZC-9 is designed for the rugged demands of field inspection. Featurin a rugged cord and an isolated trigger switch; the ZC-9 is easily serviceable.Technical Specifications
- Input supply – 220V, 50Hz, 1 Ph
- Distance across poles – 0 to 300 mm
- Lifting power Approx. 4.5Kg. at 100mm spacing
- Yoke Weight 2.5 Kgs approx.
- Controls On/Off Switch.
ZC-9D
AC/HWDC Electromagnetic Yoke
The light weight electromagnetic yoke is the ideal tool for detection of surface or sub-surface cracks and flaws in any ferromagnetic material. No other low cost, portable equipment offers such versatility in Magnetic Particle Inspection. Fast and simple to operate, it is widely used with either dry or wet method fluorescent or non – fluorescent magnetic powders, in the testing of welds, automotive or railroad components, machine parts, steel and grey iron castings, forgings and in plan inspection, maintenance and repair.Technical Specifications
- Input supply – 220V, 50Hz, 1 Ph
- Input current – 2 Amps
- Distance across poles – 0 to 300 mm
- Magnetic field AC – Constant level, DC-Pulsed, infinitely variable.
- Lifting power Approx. 27 Kg. at 100mm spacing HWDC mode.
- Yoke Weight 3.5 Kgs approx.
- Controls On/Off Switch, AC/DC Switch, DC Field intensity potentiometer
ZC-Series
Magnetic Particle Wet Benches with AC and DC Magnetization
MPI Machines equipped with AC/DC magnetization offering both circular and longitudinal magnetic field outputs. The Magnetic Particle Inspection Equipment ZC 230 is designed and manufactured to deliver 2500 Amps AC / 3000 Amps FWDC/HWDC. The 1phase FWDC is extremely useful to detect Near surface discontinuities whereas the AC is used to detect Surface discontinuities. Independently controlled contact and coil circuits determines superior indication visibility.
ZChek 9 Black
Oil-Based Visible Magnetic Particle Suspension
ZChek 9 is a black dry powder formulated to be used in wet method Magnetic Particle Inspection to detect discontinuities on light coloured surfaces for optimum colour contrast. Generally used for Non Fluorescent Magnetic Particle inspection in Fabrication , castings & Bright Bars. 9 black may be suspended in either Z801 cart oil or in water. When water as a vehicle use conditioning agents ZChek WA9.
Batch Certificate 
ZChek 9D Red
Colored Non-fluorescent Magnetic Particles
ZChek 9D Red is a Brilliant Red coloured free flowing magnetic particle powder used in Dry Method Magnetic Particle Inspection. The Brilliancy of the colour will provide perfect contrast on most of the ferromagnetic materials and its alloys. This dry method Magnetic Particle inspection is performed under normal visible light which makes the colour of the powder very clear. 9D Red is formulated with selected particle size and shape, to locate surface and near surface discontinuities in ferrous materials.
